Assess & quote
Site visit, plan review and Dial Before You Dig. One clear quote covering dig, cartage and cleanup.
Ryde is an established plateau suburb above the Parramatta River, interwar cottages on shale and sandstone turning over to townhouses and units. The regular jobs here are knock-down rebuild site cuts, pool digs and basement digs. Services located first, sites left level and clean.
Get a free quoteNo obligation, free site quote.
Got it, thanks. We'll be in touch to arrange your site assessment and clear quote.
From a knock-down rebuild to a new estate pad, each service has its own page with the detail.
Ryde sits about 16 kilometres north-west of the city. Locals place it by Top Ryde City, Ryde station, Parramatta River and ELS Hall Park. It's ringed by West Ryde, East Ryde, North Ryde, Denistone, Putney and Gladesville. What's changing: townhouses and apartments along Victoria Road, and knock-down rebuilds on the older streets.
Ryde's housing near Top Ryde City runs to interwar and postwar cottages with townhouse and apartment redevelopment along the corridors. Near Top Ryde City, knock-down rebuilds are the running theme. On a Ryde block that usually means knock-down rebuild site cuts, pool digs and basement digs.
Ryde sits on Wianamatta shale over clay on the plateau with Hawkesbury sandstone on the slopes to the Parramatta River, out toward Top Ryde City. Sandstone sits close to the surface around Ryde station, so a Ryde cut is sawn at the boundaries and broken out for anything deep. Around East Ryde, the clay is reactive, so fill goes in in compacted layers.
In City of Ryde, Ryde near Top Ryde City carries no overlay, so the cut and fill runs under the DA or CDC. Access to Ryde is off the M2 or Victoria Road; the side access takes a mini excavator, near West Ryde.
Every job follows the same sequence, whether it's a single trench or a full site cut.
A trench can be a day, a basement can be weeks. Dates come with the quote, not after.
The ridge streets, the apartment hubs and the bush gullies up to Hornsby.
From the older streets to the newer blocks, Ryde and the suburbs around it. If you're anywhere in the Ryde area, we can get to you.
See the whole Ryde and Hornsby area →It depends on the volume of material, the ground (wianamatta shale over clay on the plateau with hawkesbury sandstone on the slopes to the parramatta river), access for the machine and how far spoil has to be carted. Every job gets a written quote after a site look, with the dig, cartage and cleanup spelled out, so you know what’s included before anything starts.
Usually, if the excavation is part of a build. Cut and fill beyond set limits, work near boundaries and anything on a lot with a flood, bushfire or heritage overlay needs approval as part of the DA or CDC. We work to the approved plans; check with your certifier before the dig is booked.
A trench, pool dig or single pad is a day or two; a knock-down site cut or a basement runs longer and depends on volume, ground and weather. Dates come with the quote, not after.
Yes. Wianamatta shale over clay on the plateau with Hawkesbury sandstone on the slopes to the Parramatta River. On the river slopes, in the gullies and across the Hornsby plateau, sandstone is usually within the first metre. It’s sawn at the boundaries and broken out, and it’s in the quote when the site look finds it.
That’s the most common ground in this region and it’s priced as two jobs: clay cut and compacted fill on the ridge side, saw and breaker where the block drops into rock. The site look finds where the change is so it’s in the quote from the start.
Yes. Basements in Ryde go through shale into sandstone, are sawn at the boundaries and dug in stages to the shoring engineer’s sequence, with creek groundwater planned for from the geotech. Spoil is trucked on a schedule so the street stays clear.
Usually three ways: the back of the block is sandstone and steep, the bush carries a bushfire rating, and the trees are protected. The cut is benched, retaining is planned in, and the clearing and asset protection zone are done to the approved plan.
Reactive clay. It swells in wet winters and shrinks in dry summers, and anything poured on loose or uncompacted fill moves with it. A pad cut and filled in compacted layers to the engineer’s spec is what stops the new slab doing the same thing.
Tell us about the job. We'll look at the site before quoting, so you know what's included before anything starts.
Request received. We'll be in touch to arrange your site assessment and clear quote.