Licensed excavation, Seven Hills

Excavation & Earthworks Seven Hills

Seven Hills is 60s–80s brick veneer on rolling shale clay, standard duplex, pool and knock-down ground beside the industrial estates. The regular jobs here are knock-down rebuild site cuts, granny flat and shed pads and pool digs. Services located first, sites left level and clean.

Get a free quote
★★★★★
4.9 from happy Sydney customers
Request your free quote

No obligation, free site quote.

Licensed operators
Dial Before You Dig
Fully insured work
Local Sydney crew
Rock
Digs handled
Mini to 35t
Machine range
4.9★
Average rating
Free
Site quotes
What Blacktown jobs need

Clay that moves, creeks that flood, and blocks being split in two

Digging in Seven Hills means the reactive Cumberland Plain clay, and across the Blacktown area it's the busiest knock-down and duplex country in Sydney: the 60s and 70s houses sit on big flat blocks the council lets you split, so a lot of jobs are one house down and two pads up. The clay moves with the seasons, which is why the old slabs cracked and why fill on a new pad goes in compacted layers. Then there are the creeks — Eastern Creek, South Creek and Breakfast Creek — and the low blocks beside them carry flood controls that decide floor heights. The site's looked at for all of it before the quote, and the services are located before the bucket goes in.

Fill compacted in layers for reactive clay
Duplex and granny flat pads cut to the engineer's spec
Services located, the 60s estates weren't all mapped
Old fill and quarry ground checked before anything's built on it
Excavation in Seven Hills

What's different about digging in Seven Hills

Seven Hills, in short

Seven Hills sits about 33 kilometres west of the city. The markers are Seven Hills station, Seven Hills Plaza, Blacktown industrial estate and Lalor Park nearby. It's ringed by Blacktown, Kings Langley, Lalor Park, Toongabbie, Prospect and Girraween. What's changing: duplexes and granny flats, and knock-down rebuilds through the older streets.

The houses, and what they need

Seven Hills' housing near Seven Hills station runs to 1960s–80s brick veneer on rolling blocks, with light industry to the east. Near Seven Hills station, the older brick and fibro is renovate-or-rebuild ground. Day to day around Blacktown that's knock-down rebuild site cuts, granny flat and shed pads and pool digs.

The ground under Seven Hills

Seven Hills, near Seven Hills station, is on reactive shale clay on gently undulating ground, some fill near the industrial estate. Seven Hills' worked ground near Seven Hills Plaza is classified and either carted away or re-compacted in layers to the engineer's spec. Around Kings Langley, the clay is reactive, so fill goes in in compacted layers.

The council, access, and getting to you

Seven Hills falls under Blacktown City Council, no overlay on the Seven Hills station blocks, so cut and fill is standard DA or CDC work. Machines reach the Seven Hills block off the M7 or the Prospect Highway, and the side access takes a mini excavator, out toward Blacktown.

How it runs

First call to clean handover

Every job follows the same sequence, whether it's a single trench or a full site cut.

Services located 01

Assess & quote

Site visit, plan review and Dial Before You Dig. One clear quote covering dig, cartage and cleanup.

Access protected 02

Set out & protect

Levels marked, driveway and surfaces protected, machine sized to the site.

Spoil carted 03

Dig & cart

Dug to plan and level, spoil carted as we go so the site keeps moving.

To level 04

Trim & hand over

Site trimmed, tidy and to level, ready for the next trade.

A trench can be a day, a basement can be weeks. Dates come with the quote, not after.

Where we work

Where around Seven Hills we dig

Seven Hills and the streets around it, from the older estates to the new blocks.

BlacktownKings LangleyLalor ParkToongabbieProspectGirraween
Blacktown & Mount Druitt

Excavation across Seven Hills

From the older streets to the newer blocks, Seven Hills and the suburbs around it. If you're anywhere in the Seven Hills area, we can get to you.

See the whole Blacktown area →
Recent work

Sites we've dug

Backyards to building sites, right across Sydney.
Penrith Site cut
Castle Hill Pool dig
Ryde Basement
Liverpool Civil
“Very easy to deal with.
Excellent communication”
Priya, Penrith
“Left the site spotless.” Dave, Castle Hill
“Would definitely recommend them!” Marcus, Ryde
“Great job thanks so much.” Lauren, Liverpool
“Very easy to deal with. Excellent communication” Priya, Penrith “Left the site spotless.” Dave, Castle Hill “Would definitely recommend them!” Marcus, Ryde “Great job thanks so much.” Lauren, Liverpool
“Very easy to deal with. Excellent communication” Priya, Penrith “Left the site spotless.” Dave, Castle Hill “Would definitely recommend them!” Marcus, Ryde “Great job thanks so much.” Lauren, Liverpool

Excavation in Seven Hills, answered

How much does excavation cost in Seven Hills?

Seven Hills digs are clay rather than rock, so cost comes down to volume, how much fill and compaction the pad needs, access down the side, and cartage. Every job gets a written quote after a site look, with the dig, fill, cartage and cleanup spelled out.

Do I need council approval before you dig in Seven Hills?

Usually, if the excavation is part of a build. Cut and fill beyond set limits, work near boundaries and anything on a flood-affected lot needs approval as part of the DA or CDC. We work to the approved plans; check with your certifier before the dig is booked.

How long does an excavation job take in Seven Hills?

A trench, pool dig or single pad is a day or two; a duplex site cut with a basement runs longer and depends on volume, fill and weather. Dates come with the quote, not after.

Is there rock in Seven Hills?

Rarely. Reactive shale clay on gently undulating ground, some fill near the industrial estate. Shale bands turn up and are ripped rather than broken. Real rock work is a North Shore and Eastern Suburbs problem, not a Blacktown one.

Do you do duplex site cuts in Seven Hills?

Yes, and around Blacktown it's the most common job. The old house down, slab and footings out, the block stripped, and two pads cut and compacted to the engineer's spec, with the basement dug if the design has one.

Why do slabs and driveways crack around Seven Hills?

Reactive clay. It swells in wet winters and shrinks in dry summers, and anything poured on loose or uncompacted fill moves with it. A pad cut and filled in compacted layers to spec is what stops the new slab doing the same thing.

Can you cut a granny flat pad in my Seven Hills backyard?

Yes. Blacktown council is one of the easier ones for granny flats, and the 60s and 70s blocks have the room. A mini excavator through the side access, the pad cut level and compacted, and the service trenches run at the same time.

Can you dig a pool in Seven Hills?

Yes. The estate blocks in Seven Hills generally have the backyard and the access, and clay cuts clean walls for the shell. The pool builder's engineer will usually want the base checked for soft spots, which is standard on this ground.

What happens next

Tell us the job. We'll size it up.

Tell us the suburb, the access and what needs digging
We'll come out and look before quoting anything
You'll get a written quote with what's included spelled out
The machine's matched to your access, not whatever's free
Clear on spoil, cartage and cleanup before we start
No obligation, no pressure
Get a free quote
Excavator arm breaking rock on a Sydney site
Free quote

Ready to get your dig underway?

Tell us about the job. We'll look at the site before quoting, so you know what's included before anything starts.

Written quote after a proper site look
Free quote after a proper site assessment
Request your quote
No obligation, free site quote