Assess & quote
Site visit, plan review and Dial Before You Dig. One clear quote covering dig, cartage and cleanup.
Oakdale is a semi-rural town-and-acreage locality on shale over sandstone, dams, sheds, driveways and rebuilds on bushfire-rated blocks. The regular jobs here are bulk earthworks, dam and driveway cuts. Services located first, sites left level and clean.
Get a free quoteNo obligation, free site quote.
Got it, thanks. We'll be in touch to arrange your site assessment and clear quote.
From a knock-down rebuild to a new estate pad, each service has its own page with the detail.
Oakdale sits about 85 kilometres south-west of the city. You'll recognise it by Oakdale village, Burragorang Valley approaches and Nattai bushland. It's ringed by The Oaks, Belimbla Park and Theresa Park. What's changing: acreage rebuilds, sheds, dams and driveways, and town infill and some estate release.
Around Oakdale, near Oakdale village, you're mostly on rural town homes and acreage properties with sheds and dams. Near Oakdale village, the bigger blocks are clearing, dam and shed work. The work that comes out of Oakdale is bulk earthworks, dam and driveway cuts.
Oakdale ground runs to Wianamatta shale over Hawkesbury sandstone on semi-rural country, over by Oakdale village. Because the Oakdale rock is shallow near Burragorang Valley approaches, the boundary is sawn to protect the neighbour and the middle is broken out. Around Belimbla Park, the clay is reactive, so fill goes in in compacted layers.
Oakdale is in Wollondilly Shire Council, and the Oakdale village blocks carry bushfire controls, dug to the approved plans. Machines come in to Oakdale off Remembrance Driveway or Appin Road, and the block is rural with room to stage from.
Every job follows the same sequence, whether it's a single trench or a full site cut.
A trench can be a day, a basement can be weeks. Dates come with the quote, not after.
Oakdale and the streets around it, from the older estates to the new blocks.
From the older streets to the newer blocks, Oakdale and the suburbs around it. If you're anywhere in the Oakdale area, we can get to you.
See the whole Macarthur and Camden area →It depends on the volume of material, the ground (wianamatta shale over hawkesbury sandstone on semi), access for the machine and how far spoil has to be carted. Every job gets a written quote after a site look, with the dig, cartage and cleanup spelled out, so you know what’s included before anything starts.
Usually, if the excavation is part of a build. Cut and fill beyond set limits, work near boundaries and anything on a lot with a flood, bushfire or heritage overlay needs approval as part of the DA or CDC. We work to the approved plans; check with your certifier before the dig is booked.
A trench, pool dig or single pad is a day or two; a knock-down site cut or a basement runs longer and depends on volume, ground and weather. Dates come with the quote, not after.
On the escarpment edge, yes. Wianamatta shale over Hawkesbury sandstone on semi-rural country. Toward Wedderburn, Appin, Wilton and the Georges River gorge, sandstone is usually within the first metre, ripped where it’s weathered and broken where it isn’t. It’s in the quote when the site look finds it.
Yes. House and shed pads benched into the rolling ground, dams shaped in clay, long driveways boxed and based, and clearing done to the Cumberland Plain woodland and bushfire rules. Mine subsidence approval applies on some southern blocks and is checked first.
It affects the approval more than the dig. Mine Subsidence Advisory NSW has to approve the build, and that can set conditions on footings and fill. We flag it at the site look and dig to what’s approved.
Reactive clay. It swells in wet winters and shrinks in dry summers, and anything poured on loose or uncompacted fill moves with it. A pad cut and filled in compacted layers to the engineer’s spec is what stops the new slab doing the same thing.
Yes. The old house down, slab and footings out, the block stripped and the new pad cut and compacted, as one run if you want the demolition handled too.
Tell us about the job. We'll look at the site before quoting, so you know what's included before anything starts.
Request received. We'll be in touch to arrange your site assessment and clear quote.