Excavation & Earthworks Glenmore Park

Glenmore Park jobs are usually clay rather than rock, which keeps the dig itself straightforward, so cost comes down to the volume of material, how much fill and compaction the site needs, access, and cartage. Every job gets a written quote after a site look, with the dig, fill, cartage and cleanup spelled out.

Usually, if the excavation is part of a build. Cut and fill beyond set limits, work near boundaries and anything on a flood-affected or bushfire-rated lot needs approval as part of the DA or CDC. We work to the approved plans; check with your certifier before the dig is booked.

A small site cut, trench or pool dig can be a day or two; a knock-down rebuild site cut or a basement runs longer and depends on volume, fill and weather. Dates come with the quote, not after.

Rarely. Reactive shale clay on the lower slopes, with sandstone and rock closer to the Mulgoa ridgelines. Shale bands and river gravel are ripped rather than broken, and rock excavation as such is a North Shore and Eastern Suburbs problem, not a Nepean one.

Reactive clay. It swells in wet winters and shrinks in dry summers, and anything sitting on loose or uncompacted fill moves with it. A pad cut and filled in compacted layers to the engineer's spec is what stops the new slab doing the same thing.

Yes, and on the older estates it's the most common job. The old house down, slab and footings out, the block stripped and the new pad cut and compacted, as one run if you want the demolition handled too.

Yes. Blocks in Glenmore Park generally have the backyard and the access for it, and clay cuts clean walls for the shell. The pool builder's engineer will usually want the base checked for soft spots, which is standard on this ground.

Yes. A mini excavator through the side access, the pad cut level and compacted, and the service trenches run at the same time. Topsoil and spoil go out the way the machine came in.