Assess & quote
Site visit, plan review and Dial Before You Dig. One clear quote covering dig, cartage and cleanup.
Edmondson Park is a fast-growing station-centred estate on shale, bulk-earthworks, apartment basements and detention on release land. The regular jobs here are bulk earthworks, site cuts and detention basin. Services located first, sites left level and clean.
Get a free quoteNo obligation, free site quote.
Got it, thanks. We'll be in touch to arrange your site assessment and clear quote.
From a knock-down rebuild to a new estate pad, each service has its own page with the detail.
Edmondson Park sits about 36 kilometres south-west of the city. Locals place it by Edmondson Park station, Ed.Square town centre and Bardia nearby. It's ringed by Prestons, Leppington, Austral, Bardia and Ingleburn. What's changing: estate subdivision, bulk earthworks, detention basins and civil works, and pools and new-home site-cuts.
Most blocks in Edmondson Park, around Edmondson Park station, are new-release estate homes on small lots, with ongoing land subdivision. Near Edmondson Park station, duplex and unit sites cluster near the centres. The work that comes out of Edmondson Park is bulk earthworks, site cuts and detention basin.
Edmondson Park, near Edmondson Park station, is on Wianamatta shale over reactive clay on the growth-release land. Around Ed.Square town centre, Edmondson Park is flat enough that the drainage fall is built into the pad and the trenches rather than left to the ground. Around Leppington, the clay is reactive, so fill goes in in compacted layers.
In Liverpool City Council, Edmondson Park near Edmondson Park station carries no overlay, so the cut and fill runs under the DA or CDC. Access to Edmondson Park is off Camden Valley Way or Soldiers Parade, near Prestons.
Every job follows the same sequence, whether it's a single trench or a full site cut.
A trench can be a day, a basement can be weeks. Dates come with the quote, not after.
Edmondson Park and the streets around it, from the older estates to the new blocks.
From the older streets to the newer blocks, Edmondson Park and the suburbs around it. If you're anywhere in the Edmondson Park area, we can get to you.
See the whole Liverpool and Fairfield area →It depends on the volume of material, the ground (wianamatta shale over reactive clay on the growth), access for the machine and how far spoil has to be carted. Every job gets a written quote after a site look, with the dig, cartage and cleanup spelled out, so you know what’s included before anything starts.
Usually, if the excavation is part of a build. Cut and fill beyond set limits, work near boundaries and anything on a lot with a flood, bushfire or heritage overlay needs approval as part of the DA or CDC. We work to the approved plans; check with your certifier before the dig is booked.
A trench, pool dig or single pad is a day or two; a knock-down site cut or a basement runs longer and depends on volume, ground and weather. Dates come with the quote, not after.
Rarely. Wianamatta shale over reactive clay on the growth-release land. Shale under the clay is ripped rather than broken. Real rock work is a North Shore and Eastern Suburbs problem, not a south-west one.
Yes, and across Liverpool and Fairfield it’s the most common job. The old house down, slab and footings out, the block stripped, and two pads cut and compacted to the engineer’s spec on the clay.
Yes. The Growth Area lots west of the M7 are a big part of the work: topsoil stripped, pad cut and compacted to the precinct spec, trenches for services, and spoil carted or balanced on site. Bulk earthworks on the release stages too.
Reactive clay. It swells in wet winters and shrinks in dry summers, and anything poured on loose or uncompacted fill moves with it. A pad cut and filled in compacted layers to the engineer’s spec is what stops the new slab doing the same thing.
Yes. Dug in stages to the shoring engineer’s sequence, boundaries protected, groundwater and rock planned for from the geotech report rather than discovered on day two.
Tell us about the job. We'll look at the site before quoting, so you know what's included before anything starts.
Request received. We'll be in touch to arrange your site assessment and clear quote.